Keep your backsplash outlet free with the Lew Electric UCPDR20ACD-SS, it is an under cabinet pop down power outlet that hides in your kitchen cabinet. When closed, the top is a round piece of real stainless steel that hides under your cabinet trim, when pressed, the unit pops down 5 3/8" and exposes the power outlet. When you are done, press the top till it latches shut and is back hidden under your cabinet, there are no buttons to push to retract the unit. The 20 Amp outlet features USB-A and USB-C charging ports, and two tamper resistant (TR) plugs.
The pop down was specifically designed to meet code for kitchen and wet location installations, it meets 2023 National Electrical Code (NEC) 406.5E for kitchen use in the USA and Canada. The outlet has tamper proof plugs and is UL listed, the pop up as a complete unit is ETL listed for USA installations, and cETL and CSA approved for Canada installations.
The pop-down couldn’t be any easier to install and only needs a 3 3/4" round hole to be cut in your cabinet, after you place the unit in the hole secure to the inside of your cabinet with the included threaded flange. To power, wire the 2' cord to a junction box (not included), and you have completed installation. The unit only takes up about the space of one drinking glass in your cabinet.
The USB-A charging port can deliver up to 15 Watts of quick charging power. QC 3.0 technology can adjust the voltage and safely deliver the maximum amount of power that the device can handle.
The USB-C charging port is designed to be able to charge newer devices at an incredibly fast rate up to 30 Watts. The port is not only QC 3.0 rated, but also PD 2.0 rated. With integrated Power Delivery charging not only can you charge phones and tablets, but also laptops. The maximum output when both USB ports are plugged into is 30 watts.
When not in use, the outlets are not seen under the cabinet. When in use, the outlet pops down just enough to make plugging in your small appliances easy. The 20 amp outlet can handle the most power hungry devices giving you the most power possible.
When the unit is in the pop down position, the outlet can rotate 340 degrees. This feature allows the outlet to face the direction needed to achieve the optimal angle for plugging in the device based on the appliance location on the counter.
When cutting the hole in the cabinet, make sure to account for the 4.52" flange. Do not cut the hole too close to the back wall, or side wall of the cabinet.
Color: Stainless steel metal top
Outlet: 20 Amp, 2 charging USB
USB-A: QC 3.0 rated, 15W
USB-C: PD 2.0 rated, 30W
340 degree rotation
Tamper resistant (TR) plugs
Meets 2023 NEC code 406.5E for countertops
ETL listed for USA installations, # 4004534
cETL listed for Canada installation, # 4004534
CSA approved for Canada, #C22.2
Conforms to UL 498, Section 147
UL listed receptacle, # E491706
Water protection closed: IP43 rated
Water protection open: 1/2 gallon spill rated outlet
Bezel size: 3.98” round
Bezel thickness: .058"
Cutout size: 3 3/4” round
Pop down height: 5 3/8”
Middle top diameter: 3.32"
Depth in cabinet: 9"
Works in cabinet thickness: 3/8” - 2 3/16”
Flange width needed in cabinet: 4.52"
2’ cord needs to be hardwired to junction box
Junction box not included
Install using a licensed electrician
Consult with electrician/inspector before ordering
Designed for indoor installations only
RoHS and Proposition 65 compliant
2-year warranty
Drawing (PDF)
Installation Instructions (PDF)
Color: Stainless steel metal top
Outlet: 20 Amp, 2 USB
USB-A: QC 3.0 rated, 15W
USB-C: PD 2.0 rated, 30W
340 degree rotation
Tamper resistant (TR) plugs
Meets 2023 NEC code 406.5E for countertops
ETL listed for USA installations, # 4004534
cETL listed for Canada installation, # 4004534
CSA approved for Canada, #C22.2
Conforms to UL 498, Section 147
UL listed receptacle, # E491706
Water protection closed: IP43 rated
Water protection open: 1/2 gallon spill rated outlet
Bezel size: 3.98” round
Bezel thickness: .058"
Cutout size: 3 3/4” round
Pop down height: 5 3/8”
Middle top diameter: 3.32"
Depth in cabinet: 9"
Works in cabinet thickness: 3/8” - 2 3/16”
Flange width needed in cabinet: 4.52"
2’ cord needs to be hardwired to junction box
Junction box not included
Install using a licensed electrician
Consult with electrician/inspector before ordering
Designed for indoor installations only
RoHS and Proposition 65 compliant
2-year warranty
Drawing (PDF)
Installation Instructions (PDF)
Shipping Policy
This item qualifies for free ground shipping to anywhere in the USA and Canada. In-stock orders are shipped the same business day Monday-Friday from Boise, ID if ordered by 6pm EST.
Return Policy
If you are not completely satisfied with your purchase you may return this item for a full refund of the merchandise total, the return request must be made within 45 days from order date. Please note that you are responsible for all return shipping charges unless the item is defective or damaged. Return credits are issued within 5 business days to your original method of payment once the item is received and inspected.
Return Eligibility
Items must be in new condition and in the original packaging to qualify for a full refund (please do not modify the product in any way). If these conditions are not met, then the return could be subject to a restocking fee, or the product sent back to sender.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.